Cruise Control IGNIS, Swift, SX4, Splash, Grand VITARA

[cristyyy2003]

I am the first person in Poland who installed the sx4 cruise.

OO....congrats dude!
@miocrl is right. After u remake the loop wire, be careful u choose the right programming no and if everything is well installed, it will work as u wish.
Good luck!

[majkel220578]

Thank you for the information on Monday will try to re-run programming.

[majkel220578]

I do not know what to do next. Cruise control does not operate after programming. I do not know how to check whether the program was implemented correctly. After the junction of the loop (set coast) did not respond. green LED is lit all the time. Radio Control buttons do not work.
 
 
1.6 petrol power 107 manual gearbox

[miocrl]

retry the programming. until it works. turn ignition of after reprogramming, if you drive your car it should work only over 40 kms/h

[cristyyy2003]

@majkel220578 after reprogramming u have to cut the loop wire again before going in test check.

Radio Control buttons do not work.

This is not good. Even if CC is not well programmed the AUDIO unit must work if installed correct.

[majkel220578]

It turned out that undid the cord under your pillow, air (air bag). Now, the programming began to work properly. I made the first horse lamp is lit but cc did not work. I have to look good in the manual. From the radio buttons work.

[majkel220578]

Success cruise programmed correctly. cruise control works

[cristyyy2003]

Congrats dude! U are now officially the 1st in Poland to have a Suzuki SX4 <2010 wit' Cruise Control.   

[joesewer]

As dori sa achizitionez si eu un Cruise Control, cam cat costa, si unde gasesc manual pentru montaj.

[adrian_r5]

miocrl stie